英語読むのに時間がかかる
マスタリング
http://www.tweakheadz.com/mastering_your_audio.htm
http://www.digitalprosound.com/2002/03_mar/tutorials/mixing_excerpt1.htm
ブレイクビーツ
http://www.hattrixx.co.uk/breakbeat/showpage.asp?pID=1138633070
http://www.simonv.com/tutorials/drum_patterns.php
http://www.dogsonacid.com/forumdisplay.php?forumid=4
http://www.dnbwiki.com/index.php/Main_Page
EBM industrial
http://www.darksonus.com/forums/index.php
trance
http://forum.isratrance.com/the-mother-of-all-basslines-thread/
http://www.computermusic.co.uk/page/computermusic?entry=cm_tutorial_pdfs
-------------------------
You can also pull up some of the freqs of the kick arround 60Hz and 2.5KHz.
ベース500Hzあたりを落として250Hz以下と1500Hz周辺を上げるの
for example cut some dbs around 300 to 500 hz into the kick
BassStationにmaxxbass挿してBBEでL3
低音がうねらせて1000から2000くらいでブリブリいわせたりできる
Vocals catch your ear in the 3-4kHz range, you can give them a slight lift here, but too much will make them sound weird. So instead CUT 3-4kHz from all your other tracks.
This sounds like simple side-chain compression on the kick and snare to me
insert a compressor, and in the sidechain field select the input channel to trigger the compressor, most common use is to trigger the bass compressor with the kick drum, in which case insert compressor on bass channel, select kick channel in sidechain field... done
There are 4 different versions of the Compressor: mono, mono-sc, stereo, stereo-sc. The -sc (=sidechain)-versions have twice as many inputs as outputs (mono-sc: 2in/1out, stereo-sc: 4in/1out). The additional inputs are the sidechain-inputs.
Stereo-sc:I don't know what you have to do to tell your program that you want a bus that can handle 4 channels (to be able to use the INPUTS). Sonar 6 can't do this at all, in Cubase you'll have to use a quadro-bus, in Reaper its straightforward (set number of channels to 4 or more) - whatever. Create this 4-track-bus, send your main-signal to 1-2 of this bus, send the sidechain-signal to 3-4 of this bus, activate the "ext"-switch in the compressor and you're done.
Sonalksis SV-315
Mono-sc: Now you don't need a 4-track-bus, but a 2-track bus (-> stereo !). Same procedure as above (left main-signal, right sidechain-signal)
i usually put some PSP Vintage Warmer on a finished track, it makes it sound less flat, try the ''Mix First Aid" presets and compare them to the original using the bypass button, and after that you can boost the volume using Waves L3.
